After sales - Machine or parts Trouble shooti
CONTACT US
Candy (Manager)
Tel: 0086 531 88796181
Fax: 0086 531 88796181
Mobile: 0086 13021705897
Mail: eagle@eagleextruder.com
MSN: eaglechina@hotmail.com
Skype: eaglefoodmachinery

You Are Here:HOME > After sales - Machine or parts Trouble shooti

When you receive the extruder before start, what you should do first ?

When you receive the extruder before start, what you should do first ?

1.Heaters

First fastern the screws heating on the barrel, to keep the heaters touch barrel well. If the screws are loosen, the heater will be easy burn in short time.

2.Oil tank for gear box lubrication

For 65 and 70 model needs add 35kg lubrication oil, it is engine oil same as car using. But use lower quality type, smaller viscosity.


3. When connect the cables of the extruder to power

Be careful of the direction of the extruder parts in working

1) Oil pump for the gear box lubrication. Check the rotation mark on the pump.

2) Feeder of the extruder  which is  clockwise  rotation

3) Cutting of the extruder   which is  clockwise  rotation

4) Screws of the extruder   which is  clockwise  rotation